This product comes from Alaris Antennas catalogues

Manpack Wireless HighPower Antenna


This banded antenna is for intercepting of wireless communications. It is mounted on an N-type male connector base, with a spring for shock absorption and flexibility. A glass-fibre tube contains the antenna RF board. The array covers the GSM900, PCS, UMTS/3G and WLAN bands. Full specification coverage starts at 850 MHz, but there will be reduced performance down to 500 MHz. A 2-stack array of multiband dipoles is used to provide gain at these frequencies, with a small down tilt to improve close-in coverage The lowest feed point is elevated about 500 mm from the base of the antenna, allowing the signal to be radiated over the user’s head. This reduces absorbed power and increases field strength at the target.

Additional information

Product Data sheet

Download data sheet

Additional product downloads

No additional product downloads available.


Frequency range: Band A 850 - 960 MHz
Frequency range: Band B 1700 - 2500 MHz
Gain 3 - 4 dBi typical (in band)
Azimuth pattern Omni
Elevation pattern Narrow beam
Polarisation Vertical
Nominal input impedance 50 O
VSWR < 2.5:1
Power handling 100W CW
Connector N-type male at base
Groundplane requirements Groundplane independent
Dimensions (l x d) 650 mm x 35 mm
Total mass 0.4 kg
Mounting On N-type connector at base
Colour Black

    Product Applications

    Electronic Countermeasures
  • Counter RCIED
  • Communications Jamming

    Design Features

  • High-gain communications High-power antenna Proven flexible base spring protects the antenna Covers all handheld wireless bands