DF-A0157
High-Speed DF Antenna Band Switch
The DF-A0157 is a high-speed, 4-band switch intended for direction finding applications. It accepts four frequency bands, each with five antenna elements, and outputs the elements of any one band to the corresponding five RF outputs. The switch is controlled via an RS-485 serial interface to allow remote control over a distance of up to 500m. All switching is solid state for rapid and unlimited switching cycles. The DF-A0157 includes an internal noise source as well as an external input for chain calibration purposes. Either the internal noise source or the external calibration input may be selected to simultaneously inject a balanced signal in place of the antenna inputs and thereby correct errors caused by variations in the system’s RF path.
*No payment required on checkout
-
Call our Sales team
- +12078920011
-
Email our Sales team
- [email protected]
Specifications & Resources for DF-A0157
-
Ideal markets
-
-
Safety & Security
- Defence
- Homeland security
- Border control
-
Safety & Security
-
Ideal applications
-
-
Spectrum management
- Radio direction finding
- Electronic Surveillance
-
Signals intelligence
- Radio direction finding
-
Spectrum management
- Design Features
- DF switch 4-band switch External injection mode for chain calibration Internal chain calibration noise source, selectable with either inline amplifier or with the amplifier bypassed. Low noise amplifier on each channel with passive bypass capability High-speed solid state switching Monitoring Single-channel amplifier Low noise pre-amplifier on input DC-injection to power upper stages Advanced input stages: ESD protection Advanced output stages: Output amplifiers for long cables Cable slope correction on amplifiers ESD protection
- Frequency range
- 20 - 6000 MHz
- Frequency bands
- Band A: 20 - 500 MHz; Band B: 100 - 1400 MHz; Band C: 500 - 3600 MHz; Band D: 2000 - 6000 MHz
- Input VSWR
- < 2.5:1
- Gain
- 100 MHz: 20 ± 2 dB; 3 GHz: 24 ± 2 dB; 6 GHz: 25 ± 2 dB
- Noise figure
- < 13 dB
- Maximum input level
- 20 dBm CW, 30 dBm pulse, passive
- Power supply
- 19 – 36V DC, 1.2A at 24V
- Dimensions
- 317 mm x 168 mm x 80 mm
- Total mass
- < 4 kg
- Material
- Aluminium
- Water ingress rating
- IP54
